In this study, the authors present the latest developments on the measurements for the shielding effectiveness (SE) of gaskets and materials in reverberation chambers (RCs). A variant method, where the insertion loss of the fixture is achieved from the SE of the fixture with no sample in the aperture is found; it is appropriate for gaskets and for any flat material having a sufficiently high reflectivity at least on one side. A simple and usable condition under which the simplest method for the SE measurements of gaskets and materials in RCs can be used is also given, as well as particular cases where it can be directly applied are shown. This method, whose applicability is enhanced in this study, can be used for gaskets and any flat sample. Such developments simplify measurement setup and associated procedures. Comparisons of results support the methods for the SE measurements of gaskets and material in RCs shown in this study.
Latest developments on the shielding effectiveness measurements of materials and gaskets in reverberation chambers / Gifuni, A.; Gradoni, G.; Smartt, C.; Greedy, S.; Villalon, A. M.; Bastianelli, L.; Moglie, F.; Primiani, V. M.; Perna, S.; Thomas, D.. - In: IET SCIENCE, MEASUREMENT & TECHNOLOGY. - ISSN 1751-8822. - ELETTRONICO. - 14:4(2020), pp. 435-445. [10.1049/iet-smt.2019.0242]
Latest developments on the shielding effectiveness measurements of materials and gaskets in reverberation chambers
Bastianelli L.Writing – Review & Editing
;Moglie F.Writing – Review & Editing
;Primiani V. M.Writing – Review & Editing
;
2020-01-01
Abstract
In this study, the authors present the latest developments on the measurements for the shielding effectiveness (SE) of gaskets and materials in reverberation chambers (RCs). A variant method, where the insertion loss of the fixture is achieved from the SE of the fixture with no sample in the aperture is found; it is appropriate for gaskets and for any flat material having a sufficiently high reflectivity at least on one side. A simple and usable condition under which the simplest method for the SE measurements of gaskets and materials in RCs can be used is also given, as well as particular cases where it can be directly applied are shown. This method, whose applicability is enhanced in this study, can be used for gaskets and any flat sample. Such developments simplify measurement setup and associated procedures. Comparisons of results support the methods for the SE measurements of gaskets and material in RCs shown in this study.| File | Dimensione | Formato | |
|---|---|---|---|
|
2020_Gifuni_IET.pdf
Solo gestori archivio
Tipologia:
Versione editoriale (versione pubblicata con il layout dell'editore)
Licenza d'uso:
Tutti i diritti riservati
Dimensione
1.85 MB
Formato
Adobe PDF
|
1.85 MB | Adobe PDF | Visualizza/Apri Richiedi una copia |
|
PostPrint_SE.pdf
Open Access dal 03/06/2022
Descrizione: This is the peer reviewed version of the following article: Gifuni, A., Gradoni, G., Smartt, C., Greedy, S., Villalón, A.M., Bastianelli, L., Moglie, F., Mariani Primiani, V., Perna, S. and Thomas, D. (2020), Latest developments on the shielding effectiveness measurements of materials and gaskets in reverberation chambers. IET Sci. Meas. Technol., 14: 435-445., which has been published in final form at https://doi.org/10.1049/iet-smt.2019.0242. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions https://authorservices.wiley.com/author-resources/Journal-Authors/licensing/self-archiving.html. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited.
Tipologia:
Documento in post-print (versione successiva alla peer review e accettata per la pubblicazione)
Licenza d'uso:
Licenza specifica dell’editore
Dimensione
1.47 MB
Formato
Adobe PDF
|
1.47 MB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
