The control of indoor thermal comfort in buildings through thermal inertia during the summer season plays a fundamental role in the design of energy efficient buildings, especially in the Mediterranean climate. In fact, lightweight, highly insulated buildings cannot provide the necessary mass to buffer thermal gains. Phase change materials (PCM) have been used to provide lightweight building components with the required thermal inertia without increasing their overall mass. So far the integration of PCM into lightweight piped radiant floors for the control of thermal comfort during summer cooling regimes has not been investigated. This paper reports the development of a lightweight piped radiant floor prototype with an integrated PCM layer aimed at buffering internal gains at constant temperature during summer cooling regimes without affecting its winter warming capacity. Both the construction of the laboratory specimens and the development of the optimized finite element models are detailed and the assessment of the floor performance in a simulated room is discussed.

Radiant floors integrated with PCM for indoor temperature control Energy and Buildings / Ansuini, Roberta; Larghetti, R.; Giretti, Alberto; Lemma, Massimo. - In: ENERGY AND BUILDINGS. - ISSN 0378-7788. - 43:(2011), pp. 3019-3026.

Radiant floors integrated with PCM for indoor temperature control Energy and Buildings

ANSUINI, ROBERTA;GIRETTI, ALBERTO;LEMMA, Massimo
2011-01-01

Abstract

The control of indoor thermal comfort in buildings through thermal inertia during the summer season plays a fundamental role in the design of energy efficient buildings, especially in the Mediterranean climate. In fact, lightweight, highly insulated buildings cannot provide the necessary mass to buffer thermal gains. Phase change materials (PCM) have been used to provide lightweight building components with the required thermal inertia without increasing their overall mass. So far the integration of PCM into lightweight piped radiant floors for the control of thermal comfort during summer cooling regimes has not been investigated. This paper reports the development of a lightweight piped radiant floor prototype with an integrated PCM layer aimed at buffering internal gains at constant temperature during summer cooling regimes without affecting its winter warming capacity. Both the construction of the laboratory specimens and the development of the optimized finite element models are detailed and the assessment of the floor performance in a simulated room is discussed.
2011
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11566/64457
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact