Thin (40 nm and 160 nm) CrN coatings were deposited on steel by reactive magnetron sputtering deposition, varying the N2 flow. The coatings were characterized in the as-deposited condition and after annealing in air at 500 °C for 1 h, by X-Ray Diffraction, Transmission Electron Microscopy, Raman and Fourier Transform Infrared spectroscopies. Hardness was measured by nanoindentation. Coatings have a nanocrystalline microstructure with the phase shifting from Cr2N to CrN, increasing grain size, thermal stability and resistance to oxidation with increasing N2. Also intrinsic coating hardness is influenced by both N2 flow during deposition and film thickness, as a result of changes in phase composition and microstructural properties.
Mechanical, microstructural and oxidation properties of reactively sputtered thin Cr-N coatings on steel / Cecchini, R.; Fabrizi, A.; Cabibbo, Marcello; Paternoster, C.; Mavrin, B. N.; Denisov, V. N.; Novikova, N. N.; Haïdopoulo, M.. - In: THIN SOLID FILMS. - ISSN 0040-6090. - 519:(2011), pp. 6515-6521.
Mechanical, microstructural and oxidation properties of reactively sputtered thin Cr-N coatings on steel
CABIBBO, MARCELLO;
2011-01-01
Abstract
Thin (40 nm and 160 nm) CrN coatings were deposited on steel by reactive magnetron sputtering deposition, varying the N2 flow. The coatings were characterized in the as-deposited condition and after annealing in air at 500 °C for 1 h, by X-Ray Diffraction, Transmission Electron Microscopy, Raman and Fourier Transform Infrared spectroscopies. Hardness was measured by nanoindentation. Coatings have a nanocrystalline microstructure with the phase shifting from Cr2N to CrN, increasing grain size, thermal stability and resistance to oxidation with increasing N2. Also intrinsic coating hardness is influenced by both N2 flow during deposition and film thickness, as a result of changes in phase composition and microstructural properties.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
