Indoor acoustic comfort is a key dimension of Indoor Environmental Quality (IEQ), with substantial impact on occupants' well-being, performance, and health in buildings. Conventional acoustic monitoring typically depends on professional measurement equipment, which is expensive and impractical for continuous, large-scale deployment. This paper describes the calibration, validation, and long-term evaluation of a low-cost IoT-enabled monitoring system that employs a Micro-Electro-Mechanical Systems (MEMS) microphone (TDK InvenSense ICS-40212) for indoor acoustic comfort assessment. The sensor was calibrated experimentally by comparison with a reference measurement chain using a 1/2"microphone (PCB Piezotronics 378B02), generating acoustic white and pink noise at various sound pressure levels. Analysis of the Autopower spectrum and Third-Octave Band validation defined a reliable operational bandwidth up to 8 kHz, appropriate for indoor comfort evaluation. Noise Rating results highlight the capability of the MEMS system to assess indoor noise levels in order to ensure acoustic comfort in buildings. A one-month monitoring campaign was carried out in a laboratory setting, recording A-weighted equivalent continuous Sound Pressure Levels (LAeq) at regular time intervals. The resulting dataset was processed to derive acoustic comfort Key Performance Indicators (KPIs) through an objective classification scheme. Results show that the system provides stable, repeatable measurements under real-world conditions, effectively capturing patterns of space utilization. The proposed platform supports scalable, data-driven facility operation within smart building infrastructures.
Calibration and Validation of a Low-Cost MEMS Microphone for Indoor Acoustic Comfort Measurement / Pasquinelli, V., Manzoni, M., Serroni, S., Martarelli, M., Revel, G.M.. - (2026), pp. 7-12. (9th IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd4.0 and IoT 2026 Universita Campus Bio-Medico di Roma (UCBM), ita 2026) [10.1109/MetroInd4.0IoT69397.2026.11653162].
Calibration and Validation of a Low-Cost MEMS Microphone for Indoor Acoustic Comfort Measurement
Pasquinelli V.;Serroni S.;Martarelli M.;Revel G. M.
2026-01-01
Abstract
Indoor acoustic comfort is a key dimension of Indoor Environmental Quality (IEQ), with substantial impact on occupants' well-being, performance, and health in buildings. Conventional acoustic monitoring typically depends on professional measurement equipment, which is expensive and impractical for continuous, large-scale deployment. This paper describes the calibration, validation, and long-term evaluation of a low-cost IoT-enabled monitoring system that employs a Micro-Electro-Mechanical Systems (MEMS) microphone (TDK InvenSense ICS-40212) for indoor acoustic comfort assessment. The sensor was calibrated experimentally by comparison with a reference measurement chain using a 1/2"microphone (PCB Piezotronics 378B02), generating acoustic white and pink noise at various sound pressure levels. Analysis of the Autopower spectrum and Third-Octave Band validation defined a reliable operational bandwidth up to 8 kHz, appropriate for indoor comfort evaluation. Noise Rating results highlight the capability of the MEMS system to assess indoor noise levels in order to ensure acoustic comfort in buildings. A one-month monitoring campaign was carried out in a laboratory setting, recording A-weighted equivalent continuous Sound Pressure Levels (LAeq) at regular time intervals. The resulting dataset was processed to derive acoustic comfort Key Performance Indicators (KPIs) through an objective classification scheme. Results show that the system provides stable, repeatable measurements under real-world conditions, effectively capturing patterns of space utilization. The proposed platform supports scalable, data-driven facility operation within smart building infrastructures.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.


