The creep response of AISI 316 and AISI 316 L was analysed to provide a coherent picture of the material behaviour, valid for both conventional wrought and additively manufactured steels. Literature evidences were considered. The analysis demonstrated that the presence of a fine distribution of particles, precipitated during creep exposure in both AISI 316 and 316 L(N), should be taken into account. A recent model, expressly developed for particle-strengthened alloys, was successfully used to describe the minimum creep rate dependence on applied stress for AISI 316 and 316 L(N). The same set of constitutive equations, in combination with the composite model, was then used for describing creep data obtained by testing the AISI 316 L produced by additive manufacturing. The main difference with wrought materials was that the microstructure of the additively manufactured alloy was composed by cells (soft zones) and thick walls heavily decorated with ultrafine oxide particles (hard zones).

A unified constitutive approach for creep response of AISI 316 steel produced by conventional technologies or additive manufacturing techniques / Spigarelli, S. - In: MATERIALS AT HIGH TEMPERATURES. - ISSN 0960-3409. - ELETTRONICO. - 40:1(2022), pp. 48-63. [10.1080/09603409.2022.2146309]

A unified constitutive approach for creep response of AISI 316 steel produced by conventional technologies or additive manufacturing techniques

Spigarelli, S
2022-01-01

Abstract

The creep response of AISI 316 and AISI 316 L was analysed to provide a coherent picture of the material behaviour, valid for both conventional wrought and additively manufactured steels. Literature evidences were considered. The analysis demonstrated that the presence of a fine distribution of particles, precipitated during creep exposure in both AISI 316 and 316 L(N), should be taken into account. A recent model, expressly developed for particle-strengthened alloys, was successfully used to describe the minimum creep rate dependence on applied stress for AISI 316 and 316 L(N). The same set of constitutive equations, in combination with the composite model, was then used for describing creep data obtained by testing the AISI 316 L produced by additive manufacturing. The main difference with wrought materials was that the microstructure of the additively manufactured alloy was composed by cells (soft zones) and thick walls heavily decorated with ultrafine oxide particles (hard zones).
2022
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11566/310890
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact