Natural and mineral fibers are emerging as sustainable reinforcements for Textile Reinforced Mortar (TRM) composites. Because they typically exhibit lower elastic modulus and higher reinforcement ratios than synthetic textiles, they show distinctive mechanical behavior, questioning attention to conventional design and modelling approaches. This study presents closed-form displacement solutions for a Boundary Value Problem (BVP) describing Natural Textile Reinforced Mortar (NTRM) systems. The model uses an elastic-brittle cohesive law, accounts for mortar deformability, considering then a 'fiber-to-mortar' interface loading condition, where load is applied to the textile and transferred to the mortar. Results show that mortar deformability strongly affects stress-transfer length, especially in the elastic stage. The effective bond length is closely governed by the Cohesive Material Law (CML), with a stronger influence in low-modulus, high-thickness NTRM systems. These findings highlight the need for stiffness-consistent numerical models and experimental designs to accurately capture bond behavior and improve the use of sustainable TRM composites.

Debonding Failure-Domains in Natural Textile Reinforced Mortar Systems / Roscini, F., Misseri, G., Clementi, F.. - STAMPA. - (2026), pp. 16-20. (2026 IEEE International Workshop on Metrology for Living Environment, MetroLivEnv Cambridge, UK 14-16 July 2026) [10.1109/MetroLivEnv70468.2026.11659896].

Debonding Failure-Domains in Natural Textile Reinforced Mortar Systems

Clementi F.
Membro del Collaboration Group
2026-01-01

Abstract

Natural and mineral fibers are emerging as sustainable reinforcements for Textile Reinforced Mortar (TRM) composites. Because they typically exhibit lower elastic modulus and higher reinforcement ratios than synthetic textiles, they show distinctive mechanical behavior, questioning attention to conventional design and modelling approaches. This study presents closed-form displacement solutions for a Boundary Value Problem (BVP) describing Natural Textile Reinforced Mortar (NTRM) systems. The model uses an elastic-brittle cohesive law, accounts for mortar deformability, considering then a 'fiber-to-mortar' interface loading condition, where load is applied to the textile and transferred to the mortar. Results show that mortar deformability strongly affects stress-transfer length, especially in the elastic stage. The effective bond length is closely governed by the Cohesive Material Law (CML), with a stronger influence in low-modulus, high-thickness NTRM systems. These findings highlight the need for stiffness-consistent numerical models and experimental designs to accurately capture bond behavior and improve the use of sustainable TRM composites.
2026
979-8-3195-2115-6
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11566/365954
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? ND
social impact