The performance of a MIMO 4×4 transmission solution applied to 4th generation LTE FDD technology are evaluated inside a reverberation chamber (RC) to quantify its benefit against the LTE typical MIMO 2×2 transmission scheme, in different environment conditions. The implementation of MIMO 4×4 in live networks requires the connection of two additional cables between base station transmitters and antennas, and operators face additional costs. Throughput and modulation code scheme allocation are analyzed as a function of the signal to interference-plus-noise ratio (SINR), for both indoor and outdoor environments. Experimental results in a live network are compared to those obtained in the RC of our laboratory. Results highlight that MIMO 4×4 is convenient for SINR greater than 10–15 dB. These results can help mobile network operators to evaluate if the expected benefit justifies the additional costs in an operating actual network.
MIMO 4 × 4 vs. MIMO 2 × 2 performance assessment of a real life LTE base station in a reverberation chamber / Micheli, D.; Barazzetta, M.; Bastianelli, L.; Diamanti, R.; Carlini, C.; Colombo, M.; Moglie, F.; Mariani Primiani, V.. - In: AEÜ. INTERNATIONAL JOURNAL OF ELECTRONICS AND COMMUNICATIONS. - ISSN 1434-8411. - ELETTRONICO. - 129:(2021), p. 153500. [10.1016/j.aeue.2020.153500]
MIMO 4 × 4 vs. MIMO 2 × 2 performance assessment of a real life LTE base station in a reverberation chamber
Bastianelli L.
Writing – Original Draft Preparation
;Moglie F.Penultimo
Writing – Review & Editing
;Mariani Primiani V.Ultimo
Writing – Review & Editing
2021-01-01
Abstract
The performance of a MIMO 4×4 transmission solution applied to 4th generation LTE FDD technology are evaluated inside a reverberation chamber (RC) to quantify its benefit against the LTE typical MIMO 2×2 transmission scheme, in different environment conditions. The implementation of MIMO 4×4 in live networks requires the connection of two additional cables between base station transmitters and antennas, and operators face additional costs. Throughput and modulation code scheme allocation are analyzed as a function of the signal to interference-plus-noise ratio (SINR), for both indoor and outdoor environments. Experimental results in a live network are compared to those obtained in the RC of our laboratory. Results highlight that MIMO 4×4 is convenient for SINR greater than 10–15 dB. These results can help mobile network operators to evaluate if the expected benefit justifies the additional costs in an operating actual network.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
