Interlayer bonding in bituminous pavements is assessed by measuring the interface shear strength (ISS) of double-layered specimen, using monotonic tests. However, dynamic shear testing better simulates the actual traffic loads. The RILEM Technical Committee “Phase and Interphase behavior of bituminous Materials” (PIM) organized an interlaboratory test aimed at comparing different equipments employed to obtain the dynamic shear characterization of multilayer bituminous systems. This paper describes the experimental activities carried out at Università Politecnica delle Marche, specifically organization of the interlaboratory test, preparation of the double-layered samples to be tested by the participating laboratories and development of a new device for performing cyclic interface testing. The results include the ISS of the double-layered samples measured with the ASTRA and Leutner devices. Moreover, the results of the cyclic Leutner device are presented along with the preliminary outcomes obtained with the new cyclic ASTRA device, both in terms of stiffness and cumulative damage.

Cyclic interlayer testing in bituminous pavements / Ragni, Davide; Graziani, Andrea; Canestrari, Francesco. - STAMPA. - (2019), pp. 207-212. (Intervento presentato al convegno 7th International Conference "Bituminous Mixtures and Pavements" tenutosi a Thessaloniki, Greece nel 12-14 June 2019).

Cyclic interlayer testing in bituminous pavements

Davide Ragni
Investigation
;
Andrea Graziani
Funding Acquisition
;
Francesco Canestrari
Supervision
2019-01-01

Abstract

Interlayer bonding in bituminous pavements is assessed by measuring the interface shear strength (ISS) of double-layered specimen, using monotonic tests. However, dynamic shear testing better simulates the actual traffic loads. The RILEM Technical Committee “Phase and Interphase behavior of bituminous Materials” (PIM) organized an interlaboratory test aimed at comparing different equipments employed to obtain the dynamic shear characterization of multilayer bituminous systems. This paper describes the experimental activities carried out at Università Politecnica delle Marche, specifically organization of the interlaboratory test, preparation of the double-layered samples to be tested by the participating laboratories and development of a new device for performing cyclic interface testing. The results include the ISS of the double-layered samples measured with the ASTRA and Leutner devices. Moreover, the results of the cyclic Leutner device are presented along with the preliminary outcomes obtained with the new cyclic ASTRA device, both in terms of stiffness and cumulative damage.
2019
978-1-138-48028-5
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11566/263583
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 7
  • ???jsp.display-item.citation.isi??? ND
social impact